Skip to content
Concrete polishing and floor finishing

A floor that reflects the day.

Concrete polishing for homes, shops and industrial buildings: the slab ground flat, hardened, polished through every grit and guarded to shine for years. Drag across the floor below to move the sun, then choose how far we polish.

Time of day10:30 am
Gloss units4
Raw slab
Drag across the floor to move the sun

Raw slab: as poured, pitted, dusty and dull

Services

Pick your project

Every kind of concrete polishing job on one rack. Choose a kind of work, search for exactly what you need and add services to your plan. Your picks travel with the form.

From slab to mirror

How a plain slab becomes a polished floor

Scroll to watch a bay get surveyed, repaired, ground, hardened, polished and guarded, pass by pass, from above.

Survey the slab
  1. 1
    Survey the slabWe test hardness and moisture, map the cracks and joints, and measure how flat the floor runs, so the plan fits the slab you really have.
  2. 2
    Repair and fillCracks are opened and filled, chipped edges are rebuilt, and joints are cut or cleaned and filled so every line is tidy and sound.
  3. 3
    Grind it flatCoarse diamonds on planetary machines remove coatings and high spots, with dust pulled away at the head, until the surface is clean and level.
  4. 4
    Densify and hardenA liquid densifier soaks in and reacts with the concrete, turning the top of the slab into a dense, hard, dust-free surface.
  5. 5
    Polish through the gritsFiner and finer resin diamonds remove each earlier scratch, and the floor deepens from a haze to a clear reflection of the lights above.
  6. 6
    Guard and shineA guard coat is applied and burnished, the floor is walked with you in daylight, and you get a simple routine to keep it bright.
The Floor Lab

Find your finish right here

Tell us where the floor is, the look you picture and how it will be used, and see the polished finishes ranked for you.

Where is the floor?
The look you picture
Traffic
Wet or slick?
Budget
Best match-

      A first look from a few answers, not a promise. We grind a sample square on your own slab and you choose the finish with your eyes in your light.

      How we work

      Four habits you will notice

      • Tested before touchedWe test hardness and moisture first, so the plan fits the slab you really have, not the one in a brochure.
      • Every grit, every passNo skipped steps: each diamond removes the scratches of the one before until the floor reads clear.
      • A clear plan and priceYou see the finish, the steps and the price in writing before any machine starts.
      • Clean, quiet workDust is pulled away at the machine, the area is protected and we walk the floor with you in daylight.
      Floor plan

      Nashville, Florida and beyond

      Pick an area and the map flies there. Tap a pin to open that city’s page, or type your city.

      Floor plan of the countrySeattle, WASeattleGreen Bay, WIGreen BayMadison, WIMadisonMilwaukee, WIMilwaukeeChicago, ILChicagoCleveland, OHClevelandColumbus, OHColumbusPhiladelphia, PAPhiladelphiaIndianapolis, INIndianapolisDenver, CODenverSt. Louis, MOSt. LouisSan Francisco, CASan FranciscoClarksville, TNClarksvilleGallatin, TNGallatinGoodlettsville, TNGoodlettsvilleHendersonville, TNHendersonvilleMadison, TNMadisonHermitage, TNHermitageLebanon, TNLebanonMt. Juliet, TNMt. JulietCookeville, TNCookevilleNashville, TNNashvilleBellevue, TNBellevueAntioch, TNAntiochBrentwood, TNBrentwoodLa Vergne, TNLa VergneSmyrna, TNSmyrnaKnoxville, TNKnoxvilleNolensville, TNNolensvilleFranklin, TNFranklinArrington, TNArringtonMurfreesboro, TNMurfreesboroThompsons Station, TNThompsons StationCollege Grove, TNCollege GroveRaleigh, NCRaleighSpring Hill, TNSpring HillColumbia, TNColumbiaCharlotte, NCCharlotteMemphis, TNMemphisChattanooga, TNChattanoogaHuntsville, ALHuntsvilleLos Angeles, CALos AngelesAtlanta, GAAtlantaPhoenix, AZPhoenixDallas, TXDallasFort Worth, TXFort WorthSan Diego, CASan DiegoTallahassee, FLTallahasseePensacola, FLPensacolaDestin, FLDestinJacksonville, FLJacksonvilleAustin, TXAustinPanama City, FLPanama CitySt. Augustine, FLSt. AugustineHouston, TXHoustonGainesville, FLGainesvilleSan Antonio, TXSan AntonioDaytona Beach, FLDaytona BeachOcala, FLOcalaWinter Park, FLWinter ParkOrlando, FLOrlandoKissimmee, FLKissimmeeMelbourne, FLMelbourneLakeland, FLLakelandClearwater, FLClearwaterTampa, FLTampaSt. Petersburg, FLSt. PetersburgSarasota, FLSarasotaPort St. Lucie, FLPort St. LucieWest Palm Beach, FLWest Palm BeachFort Myers, FLFort MyersCape Coral, FLCape CoralBoca Raton, FLBoca RatonNaples, FLNaplesFort Lauderdale, FLFort LauderdaleMiami, FLMiamiKey West, FLKey West

      Pick an area and the plan flies there, or tap a pin. Every pin is a city page: hover or tap one to open it.

      Start typing, for example a city name or a state.

        Questions

        Straight answers

        What do you do?

        We polish concrete floors and do the grinding, repair, finishing and care that goes with them, for homes, garages, basements, shops, restaurants, offices, schools, warehouses, plants and hangars.

        What is the picture at the top of the page?

        It is a room with tall windows and a concrete floor. Drag across it or use the slider to move the sun, then choose how far the floor is polished to watch the reflections sharpen. A real project starts with testing your own slab.

        Is polished concrete a coating?

        No. It is the slab itself, ground flat, hardened with a densifier and polished with finer and finer diamonds, then guarded. There is no film to peel.

        How long does it take?

        A typical home takes a few days and a shop a few more. Size, condition, repairs and the finish decide it, and we confirm the schedule in the written plan.

        Does it need much care?

        Not much. A soft dust mop and a damp mop with neutral cleaner keep it bright, and a burnish and a fresh guard now and then renew the shine. No wax.

        Is it slippery?

        A honed or satin finish with a grip guard has good traction, and a mirror finish is best kept for dry areas. We can measure grip with a tester and show you the numbers.

        Can you work around my business?

        Yes. We work in zones, often at night or on closed days, with dust extraction and barriers, so your doors stay open.

        How do I get started?

        Call or text, or send the form. Tell us about the floor and your city, and we reply with clear next steps.

        Ready to see your floor shine?

        Call or text Concrete Polisher, or send the form, and tell us about the floor. We reply with clear next steps and a plan that fits the slab.

        Schedule an estimate

        Let's make your floor shine.

        Tell us about the floor or the building and the finish you picture. We read every message and reply with clear next steps and a time that fits your day.

        • Where the floor is, how big it is, what is on it now and the look you like. A photo of the floor is perfect
        • Your city, the kind of property and anything you added to your plan or saved from a Floor Lab tool
        • A clear plan and price before any machine starts, and a walk-through in daylight when the floor is done
        Prefer to talk? Call or text(800) 207-0499

        Your estimate request

        Prefer to type? Text your request. We only use your details to respond to your request.